TEKBOND

PTFE films provide a conformable release surface and exhibit a remarkably low coefficient of friction and nonstick properties. PTFE films have high temperature resistance and are virtually unaffected by all chemicals. At elevated temperatures, PTFE films retain excellent tensile strength.

Film applications include high temperature coil and capacitor wrapping, composite bonding, masking and conveyor release linings.

ADHESIVE SYSTEMS

SILICONE
Perfect for extreme temperature applications, silicone adhesive perform in continuos service temperature from -73°C up to 260°C. Silicone based adhesive system exhibit good chemical resistance, retain electrical properties.

ACRYLIC
Acrylic adhesives perform in continuous operating temperatures from -40 °C to +177 °C. Benefits include exceptional solvent resistance, excellent adhesion to metal, superior weathering and aging characteristics.
Acrylics have an excellent shelf life and when exposed to elevated temperatures their ability to wet-out improves thus increasing both adhesion and tack properties. Acrylic dhesives will generally thermoset when exposed to heat.
The adhesive will then exhibit increased strength and improved thermal capabilities.

RELEASE LINERS

PVC
A general purpose release liner, PVC conforms well to tape and protects the adhesive during handling. Although these liners have good release properties and slit well, they are generally not used for die-cutting. Only available with silicone adhesive tapes, a yellow liner is standard. Corrugated liners are standard on most PTFE coated fabrics, whilst dimpled liners are used on the majority of thermal spray tapes.

POLYETHYLENE
These thin release liners not only conform well to tape, but slit and release easily, making them a sensible choice for die-cutting. Available with acrylic adhesive systems, a smooth blue release liner is standard on most acrylic-adhesive pressure sensitive products.

PAPER (COATED)
Paper is the ideal choice for die- and kiss-cutting. They have the advantage of lost cost and excellent release characteristics. Available with silicone rubber and acrylic adhesive systems, these beige release liners are specially treated to ensure excellent release properties.

FLUOROSILICONE
This release liner incorporates advanced release technology for use with silicone adhesives. As a flat, diecutable liner, it has exceptional release properties, making it an ideal choice for small or complex parts.

PTFE PRESSURE SENSITIVE ADHESIVE TAPE WITH HIGHER ELONGATION

PTFE HIGH MODULUS PRESSURE SENSITIVE ADHESIVE TAPE

Pressure sensitive adhesive tape with higher elongation


Code	Thickness	Max width mm.	Adhesive	Colour	Liner	Roll Length mt.
4010-S5	0.127	1000	Silicone	Greysh	Embossed Yellow PVC Paper	*33
4010-S10	0.254	1000	Silicone	Greysh	Embossed Yellow PVC Paper	*33
4010-S20	0.508	1000	Silicone	Greysh	Embossed Yellow PVC Paper	*33
4020-A5	0.127	1000	Acrylic	Greysh	Polyethylene Blue	*33
4020-A10	0.254	1000	Acrylic	Greysh	Polyethylene Blue	*33
4020-A20	0.508	1000	Acrylic	Greysh	Polyethylene Blue	*33
4022-A5	0.127	1000	Acrylic 3M	Greysh	Paper	*33
4022-A10	0.254	1000	Acrylic 3M	Greysh	Paper	*33
4022-A20	0.508	1000	Acrylic 3M	Greysh	Paper	*33

Standard liner: embossed yellow PVC paper.
* Special length according to customers’ requirements

High modulus pressure sensitive adhesive tape


Code	Thickness mm.	Max width mm.	Adhesive	Colour	Roll Length mt.
HM400-S2	0.051	600	Silicone	Light Brown	33
HM481-S2	0.051	600	Silicone	Blue	33
HM511-S2	0.051	600	Silicone	Orange	33
HM400-A2	0.051	600	Acrylic	Light Brown	33
HM481-A2	0.051	600	Acrylic	Blue	33
HM511-A2	0.051	600	Acrylic	Orange	33

Without release paper -Tape on request

NASTRI ADESIVATI AD ALTO ALLUNGAMENTO


Code	Thickness	Max width mm.	Adhesive	Colour	Liner	Roll Length mt.
4010-S5	0.127	1000	Silicone	Greysh	Embossed Yellow PVC Paper	*33
4010-S10	0.254	1000	Silicone	Greysh	Embossed Yellow PVC Paper	*33
4010-S20	0.508	1000	Silicone	Greysh	Embossed Yellow PVC Paper	*33
4020-A5	0.127	1000	Acrylic	Greysh	Polyethylene Blue	*33
4020-A10	0.254	1000	Acrylic	Greysh	Polyethylene Blue	*33
4020-A20	0.508	1000	Acrylic	Greysh	Polyethylene Blue	*33
4022-A5	0.127	1000	Acrylic 3M	Greysh	Paper	*33
4022-A10	0.254	1000	Acrylic 3M	Greysh	Paper	*33
4022-A20	0.508	1000	Acrylic 3M	Greysh	Paper	*33

Liner standard: carta goffrata in PVC colore giallo
*Lunghezze speciali su richiesta cliente

NASTRI ADESIVATI AD ALTO MODULO


Code	Thickness mm.	Max width mm.	Adhesive	Colour	Roll Length mt.
HM400-S2	0.051	600	Silicone	Light Brown	33
HM481-S2	0.051	600	Silicone	Blue	33
HM511-S2	0.051	600	Silicone	Orange	33
HM400-A2	0.051	600	Acrylic	Light Brown	33
HM481-A2	0.051	600	Acrylic	Blue	33
HM511-A2	0.051	600	Acrylic	Orange	33

Senza carta – Nastro disponibile su richiesta